I would like to show all Bajaj Pulsar RS 200, AS 200 and 200 NS owners how to reset Service Icon.
In this Page i am going to Show you how to remove the service icon removal of Bajaj Pulsar RS 200, AS 200 and 200 NS. Follow below instructions to remove the service icon or Wrench icon.This may work for bajaj NS200, RS400 etc..
Two reset icon first switch off bike then press and hold M button then switch on the bike and keep pressing M button until service icon starts blinking
Once it starts blinking... Press and hold S button until service icon disappear.
The Service Reminder – ‘Wrench’ symbol glows when ODO meter reading reaches to set Kms. for service. This Icon will flash at – 1st : 450 km, 2nd : 4950 km, 3rd : 9950 km, 4th : 14950 km
1. First switch off the bike.The Service Reminder – ‘Wrench’ symbol glows when ODO meter reading reaches to set Kms. for service. This Icon will flash at – 1st : 450 km, 2nd : 4950 km, 3rd : 9950 km, 4th : 14950 km
2. You have to use the Mode and Set buttons.
3. Press the mode button to select TRIP 1 mode.
4. Press and hold M button for more than 3-4 secs.
5. keep pressing M button till Wrench/ service icon starts blinking.
6. After you must press and hold S button till Wrench/ service icon removed.
Please check out the video below!!!
It worked! 👍 Thank you.
ReplyDeleteWhy my ns200 doesn't work this method i cant remove the repair icon
ReplyDeleteThanks for the blog loaded with so many information. Stopping by your blog helped me to get what I was looking for. How Do Torque Sticks Work?
ReplyDelete