Bajaj 200Ns New Settings Tutorials

I would like to show all Bajaj Pulsar RS 200, AS 200 and 200 NS owners how to reset Time.

The main thing is that the engine MUST NOT be running while u r setting the clock
In this Page i am going to Show you how to reset the time of Bajaj Pulsar RS 200, AS 200 and 200 NS. Follow below instructions to set the timer or clock on your pulsar. This may work for bajaj NS200, RS400 etc...This may work for bajaj NS200, RS400 etc..

Two reset time first switch off and switch on the bike then press m and s for minimum 5 seconds until it starts to blink!!! now the M is used to adjust hour and S is used to adjust minutes and right after that press M and S again for 5 seconds!!! and time is set

This is How to reset the timer and reset the time of bajaj 200ns with easy steps.

1. You have to use the Mode and Set buttons .
2. Press the mode button to select TRIP 1 mode.
3. Press the mode and set button together for more than 3-4 secs. Then the ':' in the clock will stop blinking and HH MM digits will start blinking.
4. Now if you press the mode button, the hour will chance and increment by 1 each time, and pressing the set button will have the same effect on the Minutes.
5. Once the desired time is set, press both the mode and set buttons together for 3-4 secs. This will save the settings and will exit the 'clock mode'
6. P.S: do not touch the throttle till the setting is saved as it is supposed to exit the clock from the set mode without saving the value.

Please check out the video below!!!